Post Offer Free
KOMEG Technology Ind Co., Limited  

Gold Index: 6311

You are here: home  > Electronic Power 7 inch LED Controller High And Low Temperature Test Chamber

Electronic Power 7 inch LED Controller High And Low Temperature Test Chamber 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: KMT-150S

7 inch LED Controller Battery Safety Testing -70 °C Low Temperature Test Chamber
 
 
<stro

7 inch LED Controller Battery Safety Testing -70 °C Low Temperature Test Chamber

 

 

1. Explore Temperature Chambers by Type:

 

Environmental testing of automobiles requires additional consideration of the facility where the chamber will be installed, and its planned use. Test methods for vehicles can include additional conditions besides temperature and humidity in an attempt to simulate real-world conditions.

 

As we come to rely more upon batteries, reliability and safety become a concern in hot and cold conditions. Through temperature testing with KOMEG chambers, the batteries’ ability to withstand environmental extremes and stress can be identified safely. 

 

 

 

 

2. High temperature limits of test chambers


 

There are many types of test chambers, but they all high and low temperature limits. Let's take a look at the typical high temperatures thresholds and why they exist.

 

Test chambers usually have wire heaters made of a material called Nichrome. By placing successive loops of heater wire, a greater amount of heat that is generated. The result looks a lot like the inside of a toaster. Fans circulate the air past the heaters, so the samples in the chamber are not exposed to radiant heat. It is very easy to add heaters and increase the speed and / or high limit of a chamber.

KOMEG chambers typically have a high temperature limits under 200°C. Here is a break-down of why a chamber's high temperature limit exists:

 

150°C: There are two reasons we may limit a chamber to 150°C. First, there may be a limitation of the materials used inside the chamber. Secondly, for extremely fast chambers, we may limit the high temperature to avoid problems with accidentally tripping overheat protection devices.

 

170-180°C: Most models stop at this temperature range. There is a risk of burning the oil inside the refrigeration's cooling coil.

 

 

 


3. Parameter Specifications:

 

Model KMH-150S
150L chamber volume
Temp. range  -70°C 150°C 
Display resolution 0.1°C
Temperature stability High±0.5°C ,low ±1.0°C
Temperature uniformity  ±2.0°C
Heat up time  -70°C +100°C,within 60 min
Pull down time  +20°C -70°C,within 80 min
Interior Dimension(mm) W 600 x H 600 x D 460mm
Exterior Dimension(mm) W 880 x H 1730 x D 1400mm
Interior material Stainless Steel Plate ( SUS 304)
Exterior material Baked Painting Steel Or Stainless steel ( SUS304)
Insulation material Rigid polyurethane Foam and Glass Fiber Wool
Total power   7KW(heater 3KW included)
Max current 17.6A
Ambient Temp. +5°C +35°C 
Power Supply AC 380V±10 50Hz ,3 phase 4 wires +Ground Wires
Weight  260KG
Sight window size 370 X 450mm
Sample holder  2 pcs
Fittings cable port(portΦ50mm)*1, chamber lamp*1, power cable *2m
Safety device  (standard)

No fuse breaker,over pressure,over heat&over current protect,over temp.

protect, over load protect for blower, dry heat protect 

Control System Balanced Temperature & Humidity Control (BTHC)System
Refrigeration system Air Cooled (Water Cooled is option)
Hermetic compressor  

Single stage refrigeration system,                                                                           

CFC-Free refrigerant(HFC-507/HFC-23)

Controller 7-inch LCD Touch Screen panel                                                                        
Operation model :Program or fix point running
Memory capacity :120programs,1200steps,
All repeat 999 cycles, part repeat 99 cycles

Note: 1. We reserve the right to change specifications without prior notice                                                         2. Customized sizes and configurations available

 

 

 

 


4. Factory Tour --- Why  KOMEG IS Your Right Choice?


Specialized in climatic test chamber since 1990
Main parts are imported famouse brand like Tecumseh, Danfoss, Bizter, ESK,Ranco,Castel,etc.
Passed SGS,CE,TUV,etc. third party certification
Recognized by Global 500 Enterprises like EMERSON, SIEMENS, Minolta, Epson, HUAWEI, TCL,etc
Environmental friendly, low energy consumption and easy maintenance
High cost-effective and steady delivery time
Experienced and trained staffs assure good service




 

 

  

bigPhoto
 Mr. Nancy Wong

Tel: 86-20-83971185
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

KOMEG Technology Ind Co., Limited [China (Mainland)]


Business Type:Manufacturer
City: Guangzhou
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (121)