800L PVC Material Surface Corrosion Tolerance Testing Salt Spray Machine HL-160-NS manufacturer from China KOMEG Technology Ind Co., Limited

800L PVC Material Surface Corrosion Tolerance Testing Salt Spray Machine

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: HL-160-NS

800L PVC Material Surface Corrosion Tolerance Testing Salt Spray Machine

<

800L PVC Material Surface Corrosion Tolerance Testing Salt Spray Machine

1. Application

Salt water spray test chamber is widely used in Corrosion resistance test for products after treated by plating, anodized, spraying, and anti-rust, to test the surface treatment of various materials. Those so-called treatments include coating, electroplating, and films of organic and non-organic materials, anodizing, anti-rest oil and corrosion resistant treatment, which may achieve the purpose of keeping the items from being corroded for a longer period.

2. Features you need to know, If you are new to Salt Spray Tester:

1) The whole part of the device is made of P.V.C. Sheet and the inside of the device is reinforced by using a special lining material. Hence, it is sturdily made and will not transform forever.
2) The test chamber is heated from five directions in order to ensure the temperature difference in the chamber may be kept within (± 1).
3) Spray nozzle: The nozzle is specially made to enable it to suck up the salt water and then spray it out in the shape of mist with considerable high speed. When it falls on the surface of the item being tested, the difference of fallen mist may be controlled within ± 0.3ml / 80 cm2h.
4) HUNTER PRINCIPLE is used to make the saturated air hot and moist and to keep the humidity in the test chamber required for test.
5) Temperature is the pre-requisite condition that with have direct impact on corrosion rate. We use P.I.D. temperature control unit to limit the temperature difference within the range of ± 0.5.
6) A warning device is used to indicate the low level of the test fluid, when the fluid is only enough for being sprayed for five hours, a buzzer will remind the user to replenish the liquid to ensure continuous spray test.
7) Use full automatic detecting system, test stopped automatic, and lighting display when trouble.

3. Main Technical Parameter:

Specifications (Note: We reserve the right to change specifications without prior notice)
Model	HL-160-NS	HL-120-BS	HL-90-BS	HL-60-SS
Interior dimensions(WHD)mm	1600 X 500 X 1000	1200 X 500 X 800	900 X 500 X 600	600 X 400 X 450
Exterior dimensions(WHD)mm	2240 X 1500 X 1600	1410 X 1280 X 880	1460 X 1280 X 910	1130 X 1070 X 630
Testspace Volume(L)	800	480	270	108
Salt Water Tank Volume (L)	60	40	25	15
Heater	15KW+1KW	11KW+1KW	7KW+0.75KW	3KW+0.75KW
Air compressor	2HP	2HP	1/2HP	1/2HP
Temp. range (Testing barrel)	35±150±1
Temp. range (Pressure barrel)	47±163±1
Test applicable	NSS, ACSS,CASS,CORK
Pressed Air Pressure	1.00±0.01kgf/cm²
Spray Amount	1.0~2.0ml/80cm²/h(Collect at least 16 hours, take the average)
Ambient Relative Humidity	More than 85%R.H.
PH Value	6.5~7.2 3.0~3.2
Spraying Manner	Programmable Spraying
Power	AC220V 1Φ 50Hz