Post Offer Free
KOMEG Technology Ind Co., Limited  

Gold Index: 6311

You are here: home  > SUS304# Environmental Thermal Cycling Chamber 408L with 7 inch Digital Touch Screen

SUS304# Environmental Thermal Cycling Chamber 408L with 7 inch Digital Touch Screen 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: ESS-408SL5

Environmental Stress Screening Test 408L Rapid-Rate Thermal Cycle Chamber
 
 
Advantag

Environmental Stress Screening Test 408L Rapid-Rate Thermal Cycle Chamber

 

 

Advantages:

 

Rational Construction and fast cooling rate

Frequency conversion control of wind speed.

Adopts international brand of imported parts for cooling system to improve operation reliability 

Touch screen controller, friendly Man-Machine interface and safety device to ensure simple operation and easy maintenance.

 

 

Standards Implemented and Met

 

GB10592-89 Technical requirements for high and low temperature test chamber

GB2423.1-1989 Low temperature test

GB2423.2-1989 High temperature test mode

 

 

Material:

 

Interior material: Stainless Steel Plate SUS304#

Exterior material: Baked Painting Steel Plate or Stainless Steel SUS304#

Insulation material: Rigid polyurethane Foam and Glass Fiber Wool

 

 

Controller:

 

7 inch Digital Touch Screen

 

127 program, running for extremely long time 999 hours per segment, maximum 3200 times circulation

support RS485,LAN (internet access), GPRS (mobile phone) etc. communication mode. Convenient for remote monitoring and data sampling.

 

 

Parts and its brands:

 

 

 

Standrad Accessories:

Sight window *1 (Adiabatic glass window)

cable port(diameter 50mm)*2,

Samples shelves *2 sets

Chamber lamp *1

Power cable: 2 meters long
 

 

Specifications

 

Model

ESS-SL

1000SL15

Working Chamber Volume(L)

1000L

Temp Rate of Change(  ºC /Min)

15 ºC /Min

Temperature Range

 -70 ºC+100 ºC( Rapid Temp Change -55 ºC+85 ºC Full Linear Control)

Humidity Constancy

±0.5 ºC

Temp Constancy

±3.0 ºC

Exterior Material

Cold-rolled steel sheet (Rust proof & Plastic Spray treated )/ Stainless Steel

Interior Material

Stainless Steel Plate(SUS 304)

Insulation Material

Rigid Polyurethane Foam

Safety Devices

over pressure,over heat and over current protection for compressor, over temp. protection,

Compressor

Semi-Hermetic Compressor

Cooling Mode

Water Cooled

Control system

Balanced Temperature & Humidity Control System(BTC type)

Heater

Iron-chrome wire heater

Blower

Centrifugal Blower

Observation Window

Glass incorporating heat generator

Temp Sensor

Pt-100

Controller

Touch screen programmable controller

Ambient Temp.

+5ºC~+35ºC

Power

AC 380V/50Hz 3phase 5 wires+ Ground wire

Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available

 

 

Function and Features

 

a. The ESS Test Chamber is mainly used in testing the adaptability of electronics, electrical appliances, food, automobile, rubber and plastic, metal and other products, parts and materials in the high and low temperature alternating hot and humid environment when storage, transport and using
 

b. It is an reliable test equipment for all kinds of electronic, electrical, electronics, plastics raw materials and devices to do testing such as cold, heat, moisture, resistance to dry and the quality control
 

c. The new perfect design, the appearance of high texture level, the system extracts Japan, West Germany, the essence of design and manufacture of advanced technology.
 

d. Balanced temperature humidity control system (BTHC), to PID mode control SSR, so that heated humidification system was equal to heat loss capacity, it could be used long-term stability;
 

e. All-capillary, automatic load capacity adjustment system technology, more expansion valve system more stable and reliable, precise temperature and humidity control, heating and cooling rate of rapid, steady, uniform, saving valuable time for users.

 

 

 

 

Knowledge of ESS:

 

Environmental stress screening (ESS) refers to the process of exposing a newly manufactured or repaired product or component (typically electronic) to stresses such as thermal cycling and vibration in order to force latent defects to manifest themselves by permanent or catastrophic failure during the screening process. The surviving population, upon completion of screening, can be assumed to have a higher reliability than a similar unscreened population.

 

Developed to help electronics manufacturers detect product defects and production flaws, ESS is widely used in military and aerospace applications, less so for commercial products. The tests need not be elaborate, for example, switching an electronic or electrical system on and off a few times may be enough to catch some simple defects that would otherwise be encountered by the end user very soon after the product was first used. Tests typically include the following:

  • Temperature variations
  • Vibration tests
  • Pressure
  • Flexibility tests

ESS can be performed as part of the manufacturing process or it can be used in new product qualification testing.

An ESS system usually consists of a test chamber, controller, fixturing, interconnect and wiring, and a functional tester. These systems can be purchased from a variety of companies in the environmental test industry.

The stress screening from this process will help find infant mortality in the product. Finding these failures before the product reaches the customer yields better quality and lower warranty expenses. Associated military terminology includes an operational requirements document (ORD) and on-going reliability testing (ORT).

 

 

 

 

bigPhoto
 Mr. Nancy Wong

Tel: 86-20-83971185
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

KOMEG Technology Ind Co., Limited [China (Mainland)]


Business Type:Manufacturer
City: Guangzhou
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (121)