1200L LED Testing Equipment Programmable Constant Climate Test Chamber KMH-1200L manufacturer from China KOMEG Technology Ind Co., Limited

1200L LED Testing Equipment Programmable Constant Climate Test Chamber

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: KMH-1200L

1200L LED Special Programmable Constant Temperature and Climate Test Chamber

<

1200L LED Special Programmable Constant Temperature and Climate Test Chamber

Standards Implemented and Met:

GB-24231-89(IEC68-2-1) Test A: Low Temperature Test

GB-24232-89(IEC68-2-2) Test B: High Temperature Test

GJB3608-87(MIL-STD202F) High Temperature Operating Life Test

GBJl503(MIL-STD-810D) High Temperature Test

GJBl504(MIL-STD-810D) Low Temperature Test

GB24233-93(IEC68-2-3) Test Ca: method for steady-state damp heat test

GB24234-93(IEC68-2—30) Test Db: Damp Heat Alternative Test.

GJBl509-93(MIL-STD-810D) Damp Heat Test

Main Technical Specification

Chamber body
1.1 Workplace Volume	IW 1500 × IH 1000 × ID 800 mm Inner Volume:about 1.2m³
1.2 External Size	According to the design
Temperature
2.1 Temp. Range	-40ºC 150ºC
2.2 Temp. Deviation	±2.0ºC
2.3 Temp. Fluctuation	±0.5ºC
2.4 Tem. Uniformity	±2.0ºC
2.5Heating & Cooling Rate	+20ºC ↓ -40ºC within 60min (no load, ambient temperature is 20ºC) +20ºC ↑ +100ºC within 45min (no load, ambient temperature is 20ºC)
Humidity
3.1 Humidity Range	20%R.H.98%R.H
3.2Temp. &Humidity Range
3.3 Humidity Deviation	±3.0RH(75RH) ±5.0RH(≤75RH)
3.4 Humidity Uniformity	±3.0RH
3.5 Humidity Fluctuation	±2.0RH

Air Conditioning System and Electrical Apparatus Control System:

Refrigerating technology:

Nitrogen welding, two-stage rotary vane vacuum pump, ensure that the internal cooling system clean and reliable

water tray located at the bottom of the compressor to ensure condensate water drain through pipe freely at the rear of the chamber.

Body Material:

Interior material: Stainless Steel Plate SUS304#

Exterior material: Baked Painting Steel Plate or Stainless Steel SUS304#

Insulation material: Rigid polyurethane Foam and Glass Fiber Wool

Controller:

Digital Touch Screen

127 program, running for extremely long time,999 hours per segment, maximum 3200 times circulation

support RS485,LAN (internet access), GPRS (mobile phone) etc. communication mode. Conveninet for remote monitoring and data sampling.

Installation Place Requirements

Distance from the wall to both sides and rear of chamber more than 800mm, to the front more than 1500mm. Provide independent distribution switchgear, humidification condensate drains, and external power connector device is necessary.

Ground level, well-ventilated, no flammable, explosive, corrosive gases and dust;

No strong electromagnetic radiation nearby;

With floor drain(less than 2 meters from the refrigeration unit);

Venus Floor load capacity: not less than 800kg/ m²;

Leave adequate space for maintenance