1/2HP 7KW+0.75KW 270L Salt Spray Test Chamber for Laboratory 900 X 500 X 600mm HL-90-BS manufacturer from China KOMEG Technology Ind Co., Limited

1/2HP 7KW+0.75KW 270L Salt Spray Test Chamber for Laboratory 900 X 500 X 600mm

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: HL-90-BS

PVC Material Air-transportable Salt Spray Test Chamber for Surface Corrosion Tolerance Testing <

PVC Material Air-transportable Salt Spray Test Chamber for Surface Corrosion Tolerance Testing

1. Application

The units of salt spray test chambers allow selective and reproducible accelerated corrosion testing complying with the requirements of relevant national and international standards such as DIN, ISO, EN, IEC, ASTM, DEF, MIL-STD, etc.
The wide opening test chamber hood allows for loading heavy or bulky test specimens from the top. Two standard sizes are available
Salt water spray test chamber is widely used in Corrosion resistance test for products after treated by plating, anodized, spraying, and anti-rust, to test the surface treatment of various materials. Those so-called treatments include coating, electroplating, and films of organic and non-organic materials, anodizing, anti-rest oil and corrosion resistant treatment, which may achieve the purpose of keeping the items from being corroded for a longer period.

2. Features:

Corrosion resistant housing made from recyclable polyethylene
Acrylic glass nozzle in spraying duct for optimum spray fog distribution
Robust construction
Good thermal insulation; the choice of materials guarantees long service life
User-friendly, variable positioning for test specimens
External heating of test chamber using safe 42 volt system
Test specimens may also be lifted into the test chamber by crane thanks to the lightweight test chamber hood which opens to 75°
Hydrostatic hood seal
Ergonomic arrangement of operating panel and display instruments
Operation, program and set value selection via colour touch panel
Digital displays of set and actual values
Digital fill level display on the operating panel
Long-term tests are no problem thanks to the 180 litre capacity brine reservoir
Easily filled with brine through a front-mounted, 125 mm O filler opening
Ready-to-plug in, modular construction. Hence no need for assembly or commissioning on site
Test chamber design provides ease of service, all parts are easily accessible through the light-weight, removable machine compartment hood.

3. Technical Specifications:

Specifications (Note: We reserve the right to change specifications without prior notice)
Model	HL-160-NS	HL-120-BS	HL-90-BS	HL-60-SS
Interior dimensions(WHD)mm	1600 X 500 X 1000	1200 X 500 X 800	900 X 500 X 600	600 X 400 X 450
Exterior dimensions(WHD)mm	2240 X 1500 X 1600	1410 X 1280 X 880	1460 X 1280 X 910	1130 X 1070 X 630
Testspace Volume(L)	800	480	270	108
Salt Water Tank Volume (L)	60	40	25	15
Heater	15KW+1KW	11KW+1KW	7KW+0.75KW	3KW+0.75KW
Air compressor	2HP	2HP	1/2HP	1/2HP
Temp. range (Testing barrel)	35±150±1
Temp. range (Pressure barrel)	47±163±1
Test applicable	NSS, ACSS,CASS,CORK
Pressed Air Pressure	1.00±0.01kgf/cm²
Spray Amount	1.0~2.0ml/80cm²/h(Collect at least 16 hours, take the average)
Ambient Relative Humidity	More than 85%R.H.
PH Value	6.5~7.2 3.0~3.2
Spraying Manner	Programmable Spraying
Power	AC220V 1Φ 50Hz

4. Control System

1) Laboratory temperature control: Control the temperature of the lab, and it set depend on the standard temperature.
2) Timer : programmable 0.1-999hr,can set the test time arbitrarily, and close down automatically.
3) The temperature controller of the heat sink: Control the temperature, it control the around temperature of the test by coordinating the temperature of the laboratory, it will adjust when temperature variation is too large, and the setting pattern place in the control box.
4) Power switch: The light warped plate type, control the whole machine.
5) Operating switch: The light warped plate type, control the heating system of the heating through and the saturated air barrel.
6) Timer switch: The light warped plate type, control the time controller.
7) The left side Low water alarm lamp: Water level below the lower limit of heat sink, then the light on, and cut off the operating system.

5. Combined Cycle Tester System Diagram

6. Packing Info:

PP film and strong plywood case: